Peoria · Shopping & ownership guide
This page helps you confirm whether the bed of a 2025 Ford Ranger SuperCrew (XL, XLT or Lariat gasoline) will carry your gear. It compares measured floor length, wheelhouse clearance, maximum inside width and cargo volume from OEM specifications, explains how accessories can change usable space, and gives a printable worksheet you can use when sizing real items to a real truck. See the filtered inventory and model hub to inspect actual vehicles in person before purchase. (Excludes Ranger Raptor; historical model-year specifications only.)
One model. A complete research center.
Compare the vehicle and the ownership questions, then explore current inventory.
Make an informed choice
Ford’s published specifications for the 2025 Ranger SuperCrew (non-Raptor; XL, XLT and Lariat gasoline configurations) list the bed floor length, wheelhouse gap, maximum inside width and cargo volume. Use these as reference for initial planning and verify with the actual vehicle before relying on fit.
Covers, bed liners, toolboxes or racks can reduce usable floor length or clearances at the wheelhouses and sidewalls. A closed bed cover photo does not prove included accessories or usable dimensions — always measure the truck as-equipped. Do not assume tailgate or cover design for load-bearing or sheet-goods capacity from dimensions alone.
Measure these critical points on any candidate: 1) floor length from bulkhead to tailgate inner face; 2) width between the wheelhouses; 3) maximum inside width at top of bed walls; 4) vertical clearance to any installed cover or rack; and 5) any reductions from a liner or toolbox. Record measurements and compare them to the OEM reference before assuming fit.
Use the dealership’s 2025 Ranger filtered inventory to locate specific vehicles to inspect in person, and consult the existing model hub for broader guidance about these exact 2025 SuperCrew configurations. Inventory listings should be checked individually for the vehicle’s location and condition.
Compare your options
Official Ford specifications for the 2025 Ranger SuperCrew (non-Raptor) — use these reference values and then verify the truck as-equipped.
| Measurement | OEM value |
|---|---|
| Floor length (bulkhead to tailgate inner face) | 59.6 in |
| Width between wheelhouses | 48.2 in |
| Maximum inside width | 62.4 in |
| Cargo volume | 43.5 cu ft |
Your practical next steps
Bring this checklist to any test inspection. Do not rely on photos or cover-closed images to confirm usable dimensions.
Put your numbers to work
Fill these fields when evaluating if an object will fit. Compare your measured truck numbers (from the checklist) against object dimensions.
Your practical next steps
Reserve or visit a specific listing from the filtered inventory to measure the exact vehicle as-equipped. Use the checklist and worksheet during inspection. Remember this page gives historical OEM measures — confirm actual truck dimensions before purchase.
Supporting source ↗ · Supporting source ↗ · Supporting source ↗
Questions, answered
The listed bed measurements are Ford’s published specifications for the non-Raptor 2025 Ranger SuperCrew gasoline configurations (XL, XLT and Lariat). They are historical model-year specifications and do not substitute for measuring an individual vehicle, which may have liners or accessories that change usable space. (See OEM reference and dealer inventory.)
No. A closed-cover photo is representative and not proof of an included accessory or usable clearance. Covers, toolboxes and liners can change usable dimensions; always verify the truck in person. (Representative gallery image shown on this page.)
Use the dealer’s filtered 2025 Ranger inventory to find a specific listing, then schedule an in-person inspection to measure the actual truck as-equipped. The site’s existing model hub is also available for broader model information. Confirm location and condition for each inventory entry individually.
Keep exploring
See vehicle photos, equipment, availability and dealer pricing in current inventory.